Polaroid驗廠對供應商的質量控制要求：

1. Does the supplier have procedures to ensure that purchased product conforms to specified requirements?
   供應商是否有程序來確保采購的產品符合規定的要求？

2. Are subcontractors selected on the basis of their ability to meet subcontract requirements, including quality requirements?
   外包廠商是否按照設定的規范來選定基本能力需求的廠商？（含品質需求）

3. Is subcontractor qualification done by quality system audit and process quality analysis?
   供應商的資格是否通過質量體系審核和過程質量分析？

4. Are there a procedure and checklist for quality system audit and process quality analysis which are in compliance with PLR standard?
   有質量體系審核和過程質量分析并與PLR標準執行程序和檢查的清單嗎？

5. Is the subcontractor appraised periodically by the criteria of cost, quality, technology and service?
   是否從成本，質量，技術和服務的標準定期評估分包商？

6. Are up-to-date records kept of acceptable/approved subcontractors?
   是否具有合格的（承認、可接受）外廠商的最新記錄資料？

7. Are the records for subcontractor approval properly maintained and kept according to the defined retention period?
   分包商的認可記錄是否依照規定時間予以保留？

8. Does the supplier have requirement for subcontractor qualification candidate?
   是否有規定對候選供應商的要求？

9. Is the personnel with adequate product knowledge and skill sets to conduct subcontractor qualification?
   是否有足夠了解產品知識和技能的人員對分包商的資格進行設置？

10. Does the supplier review and approve purchasing documents for adequacy of specified requirements prior to release?
    供應商是否在采購文件發出前對其規定要求做出審核和確認？

11. Does the supplier ensure that the subcontractors' quality system controls are effective, which includes CLCA for any out of goal situation?
    供應商是否能確保分包商的質量控制體系是有效的？

12. Does the supplier ensure that the subcontractors' process controls are under SPC?
    供應商是否能確保分包商的統計過程控制有效？

13. Is the customer allowed to verify at source, or upon receipt, that purchased product conformed to specified requirements?
    客戶是否被要求對外部采購的部件的來源和資料進行驗證？

14. Is there a procedure for part approval? (i.e. tooling qualification, part qualification, etc.)
    是否對合格部件有檢驗規范？（如模治具合格規范、檢驗方法、檢查數量等）

15. Are part qualification reports conducted in a production environment to ensure requirements are met prior to mass production?
    首件的檢驗是否在生產作業中切實做到；能符合量產時的需求和規定嗎？

Does the part approval include verification of: 首件報告是否包含下列驗證資料：

    (a) Process control parameters/documents (GR&R, PFMEA, process management plan, production flow chart, drawings, etc.)? 生產控制參數及文件

    (b) Condition and settings of manufacturing equipment and tooling?     生產設備及模、治具狀況

    (c) Critical parameters/dimensions? (including capability index Cpk) 關鍵參數以尺寸（包括性能參數指標）

    (d) Traceability of cavity #, tooling #, and manufacturing site? 模穴、模具數及制造地點的追溯

    (e) Inspection/test yield? 檢驗合格率

16. Does the supplier have approval sheet to the subcontractor, also applied for incoming inspection of parts purchased for the final product?
    供應商是否有審批表給分包商，適用于購買最終產品零件的檢驗？

17. Does the supplier have effective traceability control on key components ? (in compliance with Product ID and Traceability)
    供應商是否有關鍵部件的有效的追溯？（產品標識和可追溯性）

18. Does the supplier have effective RMA control with subcontractors?
    供應商與分包商是否有一個有效的RMA控制程序？

19. Is appropriate data analysis is demonstrated and to evaluate the quality system which provide information relating to sub-tier suppliers?
    是否有適當?shù)臄?shù)據分析表明，質量評價系統，提供有關供應商的信息？